The Patient Safety & Decontamination Relationship

Where does the decontamination process begin in Sterile Processing?  First, we have to understand what decontamination is and how important decontamination is to the patient, to the Operating Room, the clinics, and physicians using the instruments, and to Sterile Processing.

The IAHCSMM definition of decontamination is “to make safe by removing or reducing contamination by infectious organisms or other harmful substances; the reduction of contamination to an acceptable level.”

Suboptimal reprocessing can mean that instruments that have gone through Sterile Processing are returned to the end-users with human tissue, bone, or other organic material in or on the treated instruments, this is known as re-work in the Sterile Processing (Central Sterile) industry.  To prevent re-work of an item, the item must be processed correctly the first time.  The steps to decontamination are:

  1. Moistening and removing gross soil at the point of use (generally the Operating Room)
  2. Pre-Cleaned at the Point of Use
  3. Manually cleaned in decontamination (three sink method)
  4. Ultrasonic cleaner or sonic irrigator (if IFU states)
  5. Washer/Disinfector
  6. Prep/Pack for inspection (if clean processed for sterilization)
  7. Prep/Pack for inspection (if dirty returned to decontamination for reprocessing)

The Emergency Care Research Institute (ECRI) and other reporting agencies, including the Food and Drug Administration (FDA), have received numerous reports of dirty surgical instruments that were not cleaned adequately by staff in Sterile Processing before they underwent disinfection or sterilization.  Some of these surgical instruments, but not all of the contaminated instruments were detected before they reached the patients.  Soiled instruments used during patient procedures place the patients at risk for postoperative infections, such as surgical site infections (SSI), and the possibility of contracting a potentially deadly infectious agent that causes diseases such as hepatitis C, HIV, and tuberculosis.

There is no question this is happening in healthcare; the question is why is it happening?  Experts are all agreeing there is an increase in the number of improperly cleaned surgical instruments that make it to our operating rooms and to the end-users.  But how does this keep happening?  One of the main problems in Sterile Processing today is the complexity of the instruments and the changes in technology.  Today, with the complexity of the surgical instruments, the manufacturing guidelines have changed significantly. There are more movable parts to disassemble, and narrow channels to clean with various metal types to have to worry about the compatibility of the metals.

Mistakes can be avoided by implementing some of the following:

  • Hire a skilled qualified leader to run their Sterile Processing Department (CSSD) and one who can recognize a skilled qualified technician or an individual with the capability of becoming a skilled qualified technician upon hire.
  • Evaluating staffing and determining staffing requirements, space requirements, and additional equipment requirements to meet the staffing needs.
  • Ensuring there is enough instrumentation to meet the Operating Room scheduling needs and demands and allowing adequate time to process these instruments and making sure the sales representatives bring their loaner trays in within the guides lines established by the facility (generally 48 hours prior to the surgery).
  • Standardizing the procedures in all of the reprocessing areas following manufacturing guidelines.
  • Supporting continuing education for Sterile Processing Technicians and encouraging certification for employees in states that don’t require Sterile Processing technicians to be certified.
  • Working collaboratively with the Operating Room in developing a bridge between the OR and Sterile Processing to encourage positive teamwork and cohesiveness.

The first step to decontamination begins at the point of use (the Operating Room, the clinic, the emergency room, etc.).  The Association of periOperative Registered Nurses (AORN) states, “Instruments should be cleaned and decontaminated as soon as possible after use.”  AORN also recommends “moistening and removing gross soil at the point of use can help prevent organic material and debris from drying on instruments.” Moistening of the instruments should be done with sterile water while in the Operating Room.  If normal saline is used on the instruments for wiping them clean, over a period of time, will cause possible pitting and corrosion.

Removing the gross soil as soon as possible helps to reduce the number of microorganisms on the item; reducing the nutrient material that might support microbial growth, and reduces the damage to instrumentation from such substances such as blood, saline, iodine, and various dyes.  This is an area where working collaboratively with the Operating Room can not only benefit the staff in Sterile Processing by making it easier for cleaning of surgical instrumentation, it can also protect and prolong the life of instrumentation for a healthcare facility.  In addition, this will help a facility maintain its accreditation with The Joint Commission (TJC)The Joint Commission surveyors use the Association for the Advancement of Medical Instrumentation (AAMI) standards as their guides and are very familiar with these guides, therefore, compliance is necessary.

The question is:  Who is looking at these infections? Everyone is watching for these infections, your state and federal regulators, the Center for Disease Control (CDC), National Healthcare Safety Network (NHSN), The Joint Commission, and your even national and local news agencies.

Have your Sterile Processing Department properly trained and do it right the first time.  Eliminate the Re-Work process and keep your patients safe and coming back to your facility.

Contact us at hello@moabhealthcare.com or 1-833-SPD-TECH



September 23, 2021

Forming Quality Relationships with Hospital Leadership

Starting a job in Central Sterile Services (Sterile Processing), let alone healthcare, is a process!
May 14, 2021
SPD

SPD Cultural Onboarding: The Edge Your Department is Missing

Starting a job in Central Sterile Services (Sterile Processing), let alone healthcare, is a process!
May 14, 2021
Sterile processing

Sterile Processing Outsourcing

Sterile Processing Outsourcing…. sounds like a great idea, but is it?  Some facilities have tried it with a mixed bag of success;
May 14, 2021

Disposable Blue wrap. This year’s toilet paper!

In 2020 we faced shortages in PPE, supplies and toilet paper due to the Covid 19 epidemic.
May 14, 2021

What are MSP’s and do they matter to your SPD staffing?

Many clinicians are likely asking what is a MSP?  MSPs aka Managed Service Providers are companies
November 7, 2020

5 Fun Facts About Sterile Processing

Sterile Processing Departments are often called the “Heart of the Hospital.” SPD is the area in a hospital or surgery center where cleaning and sterilization[..]
September 17, 2020

SPD Challenges: Unprocessed Trays at 0700 The Dirty Truth

If you have managed SPD, you know the drill: Monday morning, dirty trays are at a minimum and things are generally “caught up”. Each day thereafter, the quantity of dirty
August 21, 2020

4 Strategies to Improve OR-Sterile Processing Department Teamwork & Culture

I cannot think of any two departments in healthcare that depend on each other and require teamwork more than the Operating Room and Sterile Processing Departments. So why is it so common to see an “us versus them” mentality?
May 20, 2020

Improving the Sterile Processing Department

Not that long ago, Healthcare organizations were reluctant to “invest” in their Sterile Processing Departments. Critical infrastructure and human capital needs were tabled while funding was being utilized [..]
May 12, 2020

Elective Surgery Will Resume: Is Your SPD Ready?

As Perioperative Healthcare Leaders, we can all agree that these are unprecedented times. Staffing and supply resources have rightfully been diverted to care of COVID 19 patients.
December 5, 2019

The Patient Safety & Decontamination Relationship

Where does the decontamination process begin in sterile processing? First, we have to understand what decontamination is and how important decontamination is to the patient …
November 8, 2019

Who Packed Your Parachute?

During my tenure as a surgical technician, I never gave a second thought to where my surgical instruments came from. The instruments were always sterilized and placed on the correct case carts ready …
October 15, 2019

SPD Employee Appreciation & Retention Relationship

This week begins the International Sterile Processing Professionals Appreciation Week. Take time this week to personally appreciate each of your professionals in Sterile Processing.
September 16, 2019

Impact of Sterile Processing in Hospitals

Sterile processing has a direct and significant effect on surgeon satisfaction, risk, patient safety, revenue, and cost. Disruptions in sterile processing or improper sterilization …
August 7, 2019

3 Ways to Increase Retention in Your Sterile Processing Department

  3 Ways to Increase Retention in Your Sterile Processing Department High turnover rates of SPD directors and managers, educators, supervisors, and technicians can have a […]

Contact Us

hello@moabhealthcare.com

1-833-SPD-TECH

1-833-773-8324

        78 SW 7th St Suite 800
        Miami, Florida 33130

Stay Connected

Achieve better outcomes with our
monthly newsletter

    Let us know your need. We can help.

    Or you can email us at hello@moabhealthcare.com

    Apply for Jobs Here Apply Now

      December 5, 2019

      The Patient Safety & Decontamination Relationship

      Where does the decontamination process begin in sterile processing? First, we have to understand what decontamination is and how important decontamination is to the patient …
      November 8, 2019

      Who Packed Your Parachute?

      During my tenure as a surgical technician, I never gave a second thought to where my surgical instruments came from. The instruments were always sterilized and placed on the correct case carts ready …